HPHT Consistometer Model HTD8040D

Model

HTD8040D

The input voltage

AC220V±5%;50Hz

Overall dimensions

1250×790×1660mm

Packing size

1310×850×1720mm

Product Description

Cements have numerous applications in the drilling, completion, work-over, and abandonment of wells. For each application, the cement is designed with special properties and is given additives that provide predictable slurry density, volume, viscosity, compressive strength, and thickening time. Thickening time, or the time a cement slurry remains able to be pumped into the well, is the most critical properties in designing a cement. A short thickening time is desired, while maintaining the special properties of the cement’s design. The thickening time of a cement can be measured in a laboratory by testing a sample of the cement slurry in a Pressurized Consistometer. The elapsed time between an initial application of pressure and temperature on the slurry sample and the development of 100 Bearden units of consistency (Bc) is the thickening time for the sample at a particular specification test schedule [Table 8.2, API Spec 10(1)].
The Pressurized Consistometer incorporates a rotating, cylindrical Slurry Cup equipped with a stationary paddle assembly enclosed in a pressure chamber designed for a working pressure of 275 MPa (40,000 psi) at a maximum temperature of 315°C (600°F). (An air-operated hydraulic pump generates pressure to the cylinder assembly.) The hydraulic system incorporates a reservoir, piping, valves and filters. Heat is supplied to the chamber by a 10000-watt, internal, tubular heater controlled by the automatic temperature control system program. Thermocouples are provided for determining the temperatures of the oil bath and cement slurry.
The programmable temperature controller will automatically control the rate of temperature rise of the slurry (i.e. temperature gradient). When the slurry reaches the desired maximum temperature, the controller will hold the slurry temperature at that level. Pressure settings are maintained through the control of a pressure release valve and air pressure available to the pump.
The slurry container is rotated at a constant speed of 150 +/- 15 rpm by a Magnetic Drive. Drive torque is transmitted from a set of outside drive magnets, through a non-magnetic housing, to permanent magnets attached to the rotating shaft within the cylinder. Permanent, rare earth magnets are used to ensure high torque and a long magnetic-field life.

Type Specification

ModelName
HTD8040DHPHT Consistometer

Technical Specification

No.Technical Specification
1The input voltageAC220V±5%;50Hz
2The input power12.5KW
3Maximum working pressure275MPa
4Maximum operating temperature315℃
5Mixing speed150r/min
6Scope of consistency0~100Bc
7Heater power10KW
8Ambient operating temperature0~50℃
9Compressed air700KPa
10Cooling water pressure600KPa
11Net weight / Gross weight800kg/1090kg
12Overall dimensions1250×790×1660mm
13Packing size1310×850×1720mm

 

Request a quote